Production description
A damp proof course ( DPC ) is manufactured and tested to Australian and New Zealand standard 2904-1995,is a high impact low density polyethylene film embossed on both sides. It is a physical barrier inserted into the fabric of a building to stop water passing from one place to another. This can be on a horizontal plane, stopping water rising up from the ground by being sucked up by the dry masonry above, or vertically to stop water passing from the outside of a building, though the masonry, to the inside. DPC's have taken many forms through the ages and one of the earliest forms was to use a layer of slate in the construction. Slate is still used but the less expensive plastic version ( below right ) is now more widely used.
Recommended Use:
Used as a non-exposed dampcourse material in brick and blockwork walls and also as a concealed flashing around internal window and door frames.
Sizes available
|
50mm x 30m roll
|
110mm x 30m /50m roll
|
110mm x 30m roll
|
|
75mm x 30m roll
|
150mm x 30m /50m roll
|
150mm x 30m roll
|
|
90mm x 30m/50m roll
|
230mm x 30m /50m roll
|
230mm x 30m roll
|
|
100mm x 30m roll
|
300mm x 30m /50m roll
|
300mm x 30m roll
|
|
140mm x 30m roll
|
380mm x 30m /50m roll
|
380mm x 30m roll
|
|
150mm x 30m roll
|
450mm x 30m /50m roll
|
450mm x 30m roll
|
|
200mm x 30m roll
|
600mm x 30m /50m roll
|
600mm x 30m roll
|
|
250mm x 30m roll
|
|
900mm x30m roll
|
|
300mm x 30m roll
|
|
1200mm x 30m roll
|
|
1000mm x 30m roll
|
|
1500mm x 30m roll
|
|
|
|
|
Special sizes made to order
NOTED: IT IS NOT USED IN APPLICATIONS WHERE IT IS EXPOSED TO
DIRECT SUNLIGHT.
