Product Description

Production description

A damp proof course ( DPC ) is manufactured and tested to Australian and New Zealand standard 2904-1995,is a high impact low density polyethylene film embossed on both sides. It is a physical barrier inserted into the fabric of a building to stop water passing from one place to another. This can be on a horizontal plane, stopping water rising up from the ground by being sucked up by the dry masonry above, or vertically to stop water passing from the outside of a building, though the masonry, to the inside. DPC's have taken many forms through the ages and one of the earliest forms was to use a layer of slate in the construction. Slate is still used but the less expensive plastic version ( below right ) is now more widely used.

Recommended Use:

 

Used as a non-exposed dampcourse material in brick and blockwork walls and also as a concealed flashing around internal window and door frames.

 

Sizes available

 

50mm x 30m roll	110mm x 30m /50m roll	110mm x 30m roll
75mm x 30m roll	150mm x 30m /50m roll	150mm x 30m roll
90mm x 30m/50m roll	230mm x 30m /50m roll	230mm x 30m roll
100mm x 30m roll	300mm x 30m /50m roll	300mm x 30m roll
140mm x 30m roll	380mm x 30m /50m roll	380mm x 30m roll
150mm x 30m roll	450mm x 30m /50m roll	450mm x 30m roll
200mm x 30m roll	600mm x 30m /50m roll	600mm x 30m roll
250mm x 30m roll		900mm x30m roll
300mm x 30m roll		1200mm x 30m roll
1000mm x 30m roll		1500mm x 30m roll

Special sizes made to order

 

NOTED: IT IS NOT USED IN APPLICATIONS WHERE IT IS EXPOSED TO

 

DIRECT SUNLIGHT.

Payment Terms︰ T/T

Lead Time︰ 20days

Standards Certificate︰ ISO, MSDS, CE

Product Image